This guide is about the best ways to Fix DNS Probe Finished No Internet error.
As a result of the technological drive and the availability of internet surfing devices, coupled with the accessibility ease factor to the Internet.
We are privileged to be able to engage in surfing through the Internet, conducting research, studying, or we are just surfing the net for our pleasure and then boom!
We see on the screen of our devices an error message DNS_Probe_Finished_No_Internet.
Most times, this leaves us completely clueless, not having a precise knowledge of what is going on.
Amongst the most typical challenges that face users of the Internet, is the DNS_Probe_Finished_No_Internet error.
The computer system is designed to be able to show error details, including sources.
It identifies to the users in the contents of its error message display, including the cause of the errors, and provides hints to solving them. DNS is the acronym for Domain Name Systems.
The DNS_Probe_Finished_No_Internet is a Domain Name system error.
Domain Name error is usually unresponsive and slows down internet connections.
The result of this is that it makes the cache not to complete loading resulting in the error message.
However, this is just a primary cause of DNS_Probe_Finished_No_Internet Error.
- Also Read:- 15 Things To Consider Before Buying a Laptop.
Causes of DNS Probe Finished No Internet Errors-
It is quite a tricky error with a variety of ways of solving them. Listed below are probable causes of this error.
- There could be a problem with the DNS server used by your device; this could cause the error.
- Outdated browsers- sometimes, when we use an outdated browser, it results in this error. The browser cannot reconcile the DNS of the website.
- It could be a result of security measures you have taken, like installing apps that prevent your access to specific websites. Accessing this website will result in an error message.
- The DNS type can cause a DNS_Probe_Finished_No_Internet.
- The software used for browsing could be the cause of the error.
- Lack of internet connection on your router or internet downtime from your Internet Service Provider
- An outdated network adapter driver could stall internet access.
- Another probable cause of DNS_Probe_Finished_No_Internet error is the wrong router or modem settings.
How to fix DNS Probe Finished No Internet Error:-
Due to the nature of DNS_Probe_Finished_No_Internet error of not having a specific cause, the solutions are also are not accurate.
But there is a list of options to try out to troubleshoot checking to see which works. The following are ways the error can be solved;
Ascertain Internet Connectivity-
Usually, the DNS_Probe_Finished_No_Internet is a lack of internet connection; thus, the solution to this is to ascertain and verify that internet connection is established.
In a case where your Internet is from a cable internet service provider, make sure the router is receiving signals from your ISP. To ascertain this
- Ensure that your router has a connection to a power source and is turned on.
- Check to make sure that all indicator lights are turned on on the router.
- Ascertain that a wired connection existing between your computer and the router.
For those who are using wifi, to ascertain that you have established connections, get another device, and try connecting to that same network and see if it accesses the Internet.
Then try to connect. If, after these, the error does not repeat, then it probably came from a poor internet service.
- Also Read:- Is a Career in Computer Science Worth it?
When surfing the net apart from getting the information we require, there are other attribute data that accompanies the information that includes Uniform Resource Locators, caches, cookies, saved passwords, etc.
These may have to be cleared in order to pave the way for a new site to open as there could be conflict in web offerings.
To clear caches, if you use Google Chrome browser, there are to major ways; manual clear and shortcut clearing.
To do this, you’re go-to the ‘menu’ option usually found at the top right corner of your browser then locate settings.
Select ‘more tools’ and click on ‘delete browser data.’ You are at liberty to select the time from which the delete should take place.
The shortcut method includes the use of keyboard short commands. Press ctrl+shift+del; this immediately prompts open a new tab showing ‘clear browser cache.’
You can select the time from which the delete should take place. Clear all by clicking ‘select all,’ then select ‘delete browser data ‘and then reload the site.
Note:- If you use a Firefox browser, the steps for clearing the cache are:
You go to the top right corner and click on Menu; it is indicated by four horizontal lines that are packed together.
Now, select the privacy and security panel in the cookies and site Data section go and click clear data then remove the checkmark in front of it, then you are good to go!
- Also Read:- What Causes Motherboard Failure? How to Fix it?
Update your browser-
Websites do have software additions that make for the customization of the programs and computer software applications extending to the web browsers by the content proffered by the website.
The sophistication of these plugins undergoes constant updates, so do the web browsers.
It is necessary always to update the web browser you use to keep up with the development as it could result in a DNS_Probe_Finished_No_Internet error when there an issue.
Another advantage of using an updated browser is that it helps your browsing to be at optimum.
To update your browser, if you use the Google Chrome browser, for instance, go to the menu button.
Click it, and a list of drop-down options would appear, you then select ‘Help’ and click ‘About Google Chrome.’
The current browser option would be shown on the screen, and it automatically checks for updates and begins to update the browser if it was not updated.
If you use the Firefox browser, the process is about the same: you locate the menu button follow the process, then click restart after it is completed.
After the browser update, try loading the page again and see if the error messages show. If it persists, then you know the cause of the error is from another source.
Change Default DNS to Google DNS-
Sometimes it is necessary after the setup process of your internet router to change the DNS to another one such as the Google DNS.
Google’s DNS is provided to internet users free of charge and is an alternative DNS which serves as a substitute server naming system which acts to resolve DNS issues of websites.
Google DNS provides more security against malware and viruses and loads websites faster compared to the default DNS.
To change the DNS, go to ‘Network connections’ in the network, and settings select the connection type.
Now click ‘change adapter’ right click on the connection, then go to properties and select ‘internet protocol Version 4 (TCP/IPv4) and click ‘properties.’
Now select ‘Use the following DNS server addresses’ and enter 184.108.40.206 as ID for the preferred DNS server and 220.127.116.11 as ID for the alternative DNS server.
Following the process above, you have to, however, input the following values for the fields.
For the preferred DNS server: 18.104.22.168 and for Alternate DNS server: 22.214.171.124.
After this, you retry to connect to the Internet and see if the DNS_Probe_Finished_No_Internet error reoccurs.
If it does, then you may have to try out an alternative resolution method to fix the error.
The Command prompt is another medium to changing the DNS. To do this got to windows and search for CMD. This indicates a command prompt.
Next, you press ‘ctrl+shift+enter this is to open a command prompt with exclusive privileges as an administrator.
You have to open the command prompt as administrator to set this; sometimes, it may require the administrator privileges.
In the command prompt, you type ‘netsh Winsock reset’ then press ‘Enter’ after that you reboot the system.
Update your Network Adapter Driver-
Network Driver adapters are an integral part of the motherboard of the computer system, which has an inbuilt card that functions to connect the computer to the network cables for internet access.
Sometimes to solve the DNS_Probe_Finished_No_Internet error, we may need to update this Network Adapter Driver.
To this, you select on the keyboard’ Windows+R.’ This brings the Run application software at this stage. You type in ‘devmgmt.msc’ and press enter key.
It brings out a list on the list click on ‘Network Adapters’ from the list, then you identify the network you are using to connect to the Internet and click on ‘Update Driver.’
After that search for the newly updated driver software. Alternatively, you could go to ‘my computer’ then search for driver software using the name.
- Also Read:- Best Prank Websites to fool your friends.
Disable all the Web Filtering Software-
Web filters are software installed in the computer system that functions to restrict the users’ contents that are open and accessible on the Internet. Frequently is it a known internet filter.
The filtering software determines what content is safe to access what content is marked unsafe to access.
This results in the blocking of the unsafe content, and the ones marked safe would be allowed.
Sometimes the build of the software could conflict with the internet connection, thus impeding the loading of websites.
Sometimes, uninstalling the software or temporarily disabling it would solve the DNS_Probe_Finished_No_Internet error.
Use Command Prompt-
The next option is to use the command prompt in resolving the DNS_Probe_Finished_No_Internet error.
To do this, go to windows and search for CMD; this indicates command prompt when this open you press ‘ctrl+shift+enter this is to open the command prompt ( as an administrator).
You have to open the command prompt as an administrator to set this; sometimes, it would need administrator privileges.
On getting to command prompt, type in these commands- ipconfig/release then press ‘Enter’ then you type in ‘ipconfig/renew’ then activate the command by pressing enter.
After this is done, the next thing is to clean the DNS by typing the following command ipconfig/flushdns. When all these processes are completed, you restart the computer; this should resolve the error message problem.
Conduct a Router Reboot-
As earlier emphasized, DNS_Probe_Finished_No_Internet error is not a specific computer error and thus could possess multiple lines of causes.
Sometimes rebooting your router could be a solution to this error message display.
To reboot a router, the following steps are undertaken firstly, and you disconnect the router and other associated hardware connected to the system examples of those are network switches.
You then wait for about 20-30 seconds during this time your computer would resolve the issue with your Internet Service Provider.
You can now plug in the router. This should automatically cause the router to be powered on, but if it does not, you may have to power it by tapping the power button manually.
After a successful reboot of the router, you go to the settings of the router and access it with any
of the following URLs.
For router made by Linksys, the https//:192.168.0.1,
D-Link company it is https://192.168.0,
Belkin, it is http://192.168.2.1.
- Also Read:- How to fix slow wifi speed?
DNS_Probe_Finished_No_Internet errors are quite dog-headed computer issues, which sometimes require a long list of troubleshooting options.
However, following these steps, one is sure to overcome the error.